Recently, 1 of 4 disks in my RAID 5 array failed. I searched for a replacement part and learned that only newer versions of hard disks are available. This “updated” version Has exactly the same spe
Author: Simo
RAID Data Recovery, RAID5 Disk Array Data Recovery Case, Server Data Recovery
Server data recovery user: A university in Jiangxi Province
Server data recovery failure description:
The user is using Sugon Model 16-bay optical fiber storage cabinet, the underlying storage medi
After starting RAID, adjust the XFS size on CentOS
I have a 16Tb partition on the Raid 6 array using the xfs file system.
# df -hTFilesystem Type Size Used Avail Use% Mounted on
/dev/sdc1 xfs 15T 7.4T 7.2T 51% /backup I used the LSI Megaraid
FREESURFER SURFACE File Format
This article is a brief translation of http://www.grahamwideman.com/gw/brain/fs/surfacefileformats.htm, because I am not translating word by word, but Translate some sentences that I think are more
RAID – How to migrate the disk from one DELL PE 2850 to another?
I have a Dell PE 2850 bare chip, and I need to move its SCSI disks to another PE 2850. These disks are in RAID1. I tried to move them over, just hope PERC does it right Things, but it didn’t instal
HP P410 RAID Samsung 830 SSD Debian 6.0 – What performance is expected?
I am renting two dedicated servers from a hosting company. Here are the specifications:
server1:
HP ProLiant DL165 G7
2x AMD Opteron 6164 HE 12-Core
40 GB RAM
HP Smart Array P410 RAID control
Hardware – What do you think the minimum developer-level PC?
Processor speed, memory, disk space, screen size. Which corners can be cut, and which corners should not be cut?
To be more specific-In my case, I am considering using eclipse as an IDE to de
How to solve the damage of the hard disk firmware area? Just learn these steps
[Fault category]
(1) Fault type: the hard disk firmware area is damaged
(2) Typical characteristics:
1. The hard disk seeks normally but cannot identify itself correctly Model or capacity
2. The
Restore highly degraded RAID arrays
I have a Linux RAID6 array (mdadm) consisting of 8 disks.
2 disks failed. I replaced them and now I have 2 new empty disks.
I want to rebuild raid
But
when I started raid reconstruction
RAID – DL160 GEN9 P440 SAS cable
We recently purchased a new HP Smart Array P440 RAID controller from the local HP reseller store of the HP DL160 gen9 server. (P/N: 783361-425) We hope to be on the server Running ESXi with three v