Recently I have been playing with the (second-hand server) I recently purchased (HP ProLiant ML330 G6), and I am a bit confused about its current RAID configuration. I use the HP System Management
Category: Storage
Data storage is the temporary files generated by the data stream during the processing or the information that needs to be searched during the processing. The data is recorded on the internal or external storage medium of the computer in a certain format. Data storage should be named, and this naming should reflect the meaning of the composition of the information characteristics. Data flow reflects the data flowing in the system, showing the characteristics of dynamic data; data storage reflects the static data in the system, showing the characteristics of static data.
Partition aligned on Megaraid RAID 1, with 4K sector (advanced format) drive
I want to set up RAID 1 (mirroring) on an LSI MegaRAID SAS 8708EM2 (1078 chipset) with a 4k sector (advanced format) drive. As far as I know, the controller does not 4k sector drives are official
Server RAID is dead. How will you recover data from its drive?
We currently have 9 machines. One of them has an electrical fault and blows up the circuit board, but the drive seems to be okay. I’m not entirely sure that I will even try to recover data from it.
Partition downgrade in the RAID5 system
I have a server running Debian Squeeze and a 3x 500 GB drive RAID5 system. I have not set it up myself. At startup, the state of a partition in the RAID array seems to be very bad. < p>
md: b
RAID – Can you use the server RAM to make NAS cache?
I have a 4 CPU 16GB RAM system, with Areca 1230 RAID card and 6 HD, using RAID 0 1 configuration, with 1 hot backup. The system has 2 onboard 1Gpbs nics
I want to turn the system into a NAS.
Use RAID and LVM disk array technology
RAID Redundant Array of Disks
RAID technology combines multiple hard disk devices into one capacity A larger and more secure disk array, and the data is divided into multiple segments and store
RAID – FreeBSD ZFS is slow
My home storage server, currently composed of 6 x 3 TB Seagate drives, 12 GB DDR3 RAM and Core i3 540, has very poor performance when reading or writing to the raidz2 I set .
Use /usr/bin/tim
RAID – How to combine 2 controllers in HP DL370 G6 (6 brackets)
I have a server DL370 G6, as shown below, I want to install Windows Server 2008 E. We are using it for camera recording. Each slot has 6 2 TB hard drives.
I want to merge them into Raid 1 for
RAID5 (five disks, three pieces of RAID, two to back up)
1. Add five more disks to the virtual machine.
-C stands for creation operation, -v shows During the creation process, -a yes to check the RAID name, -n is the number of hard d
SSD is still SSD? (Virtualization – XenServer)
I have a few running Xenserver boxes (very good). Most of us have set up RAID1 with two mechanical 7200rpm enterprise SATA drives, or with 4 7200 enterprise RAID10 for SATA drives. I chose sata dri