Reference: http://tieba.baidu.com/p/4224078869
1. First open the back cover, take out the mechanical hard disk, replace the fixed frame with the solid state disk, The mechanical disk is installed on the hard disk bracket.
Install the solid state drive, and then remove the plastic case of the optical drive.
< p>
Install the prepared mechanical hard disk, insert it into the slot, and fasten the screws.
“I bought Jiayi’s tray, which is a little bit gaped, so it can be used. The original one is too expensive.”
The solid state is installed in the original mechanical disk. There, the mechanical disk is installed in the optical drive. There is no CD-ROM drive, there is not sealed, there is a weight reduction module installed.
Which one did you choose for the Jiayi hard drive bay? How about the fit? My e550c also uses machinery
The last picture of the fit is Jiayi H916.
Dual system related: http://tieba.baidu.com/p/3992119692
After restarting again, it will enter the system in the SSD. If you want to return to the system in the HDD, there are two ways. One is to adjust it through the BIOS according to the steps just now, and the other is to directly remove the SSD in the optical drive position, and then turn it on to enter the system in the HDD. After going back, you can enter the system in the SSD again. So if you switch between the two systems frequently, it is recommended not to lock the optical drive tray with screws, but be careful not to move the computer casually.