< /p>
Mirror Group 0:
physicaldrive 1I:1:1 (port 1I:box 1:bay 1, SAS, 72 GB, OK)
physicaldrive 1I:1:2 (port 1I :box 1:bay 2, SAS, 72 GB, OK)
physicaldrive 1I:1:3 (port 1I:box 1:bay 3, SAS, 72 GB, OK)
Mirror Group 1:< br /> physicaldrive 1I:1:4 (port 1I:box 1:bay 4, SAS, 72 GB, OK)
physicaldrive 2I:1:5 (port 2I:box 1:bay 5, SAS, 72 GB , OK)
physicaldrive 2I:1:6 (port 2I:box 1:bay 6, SAS, 72 GB, OK)
If my understanding is correct, drives 1 and 2 are possible It will fail, RAID will still work.
This does not seem right to me, I am thinking about RAID 1 0, 6 drives should look like this:
< pre>Mirror Group 0:
physicaldrive 1I:1:1 (port 1I:box 1:bay 1, SAS, 72 GB, OK)
physicaldrive 1I:1:2 (port 1I:box 1: bay 2, SAS, 72 GB, OK)
Mirror Group 1:
physicaldrive 1I:1:3 (port 1I:box 1:bay 3, SAS, 72 GB, OK)
physicaldrive 1I:1:4 (port 1I:box 1:bay 4, SAS, 72 GB, OK)
Mirror Group 2:
physicaldrive 2I:1:5 (port 2I:box 1:bay 5, SAS, 72 GB, OK)
physicaldrive 2I:1:6 (port 2I:box 1:bay 6, SAS, 72 GB, OK)
The data will be striped across 3 mirror pairs.
Both configurations are possible, or is it just the first?
Here In this arrangement, the HP Smart Array controller splits the disk into:
physicaldrive 1I:1:1 pairs to physicaldrive 1I:1:4
physicaldrive 1I: 1:2 pairs to physicaldrive 2I:1:5
physicaldrive 1I:1:3 pairs to physicaldrive 2I:1:6
RAID 1 0 == RAID 1 pair, striped (RAID 0)Together…
You can lose one disk from each pair listed above. Or, one drive per “mirror group”.
In addition: What are the different widely used RAID levels and when should I consider them?
I have an HP Smart Array P400i raid controller with 6 disks and work in RAID 10. This is what it looks like:
Mirror Group 0:
physicaldrive 1I:1:1 (port 1I:box 1:bay 1, SAS, 72 GB, OK)
physicaldrive 1I:1:2 (port 1I:box 1:bay 2, SAS, 72 GB, OK)
physicaldrive 1I:1:3 (port 1I:box 1:bay 3 , SAS, 72 GB, OK)
Mirror Group 1:
physicaldrive 1I:1:4 (port 1I:box 1:bay 4, SAS, 72 GB, OK)
physicaldrive 2I: 1:5 (port 2I:box 1:bay 5, SAS, 72 GB, OK)
physicaldrive 2I:1:6 (port 2I:box 1:bay 6, SAS, 72 GB, OK)
If my understanding is correct, drives 1 and 2 may If it fails, RAID is still okay.
This doesn’t seem right to me, I am thinking about RAID 10, 6 drives should look like this:
Mirror Group 0:
physicaldrive 1I:1:1 (port 1I:box 1:bay 1, SAS, 72 GB, OK)
physicaldrive 1I:1:2 (port 1I:box 1:bay 2, SAS, 72 GB, OK)
Mirror Group 1:
physicaldrive 1I:1:3 (port 1I:box 1:bay 3, SAS, 72 GB, OK)
physicaldrive 1I :1:4 (port 1I:box 1:bay 4, SAS, 72 GB, OK)
Mirror Group 2:
physicaldrive 2I:1:5 (port 2I:box 1:bay 5, SAS , 72 GB, OK)
physicaldrive 2I:1:6 (port 2I:box 1:bay 6, SAS, 72 GB, OK)
Data will be striped across 3 mirror pairs化.
Both configurations are possible, or is it just the first one?
You cannot choose the drive arrangement/pair.
In this arrangement, the HP Smart Array controller separates the disks. Divided into:
physicaldrive 1I:1:1 pairs to physicaldrive 1I:1:4
physicaldrive 1I:1:2 pairs to physicaldrive 2I:1:5< br />physicaldrive 1I:1:3 pairs to physicaldrive 2I:1:6
RAID 1 0 == RAID 1 pair, striped (RAID 0) together…
You can lose one disk from each pair listed above. Or, one drive per “mirror group”.
In addition: What are the different widely used RAID levels and when should I consider them ?