Recently, 1 of 4 disks in my RAID 5 array failed. I searched for a replacement part and learned that only newer versions of hard disks are available. This “updated” version Has exactly the same spe
RAID Data Recovery, RAID5 Disk Array Data Recovery Case, Server Data Recovery
Server data recovery user: A university in Jiangxi Province
Server data recovery failure description:
The user is using Sugon Model 16-bay optical fiber storage cabinet, the underlying storage medi
After starting RAID, adjust the XFS size on CentOS
I have a 16Tb partition on the Raid 6 array using the xfs file system.
# df -hTFilesystem Type Size Used Avail Use% Mounted on
/dev/sdc1 xfs 15T 7.4T 7.2T 51% /backup I used the LSI Megaraid
FREESURFER SURFACE File Format
This article is a brief translation of http://www.grahamwideman.com/gw/brain/fs/surfacefileformats.htm, because I am not translating word by word, but Translate some sentences that I think are more
RAID – How to migrate the disk from one DELL PE 2850 to another?
I have a Dell PE 2850 bare chip, and I need to move its SCSI disks to another PE 2850. These disks are in RAID1. I tried to move them over, just hope PERC does it right Things, but it didn’t instal
HP P410 RAID Samsung 830 SSD Debian 6.0 – What performance is expected?
I am renting two dedicated servers from a hosting company. Here are the specifications:
server1:
HP ProLiant DL165 G7
2x AMD Opteron 6164 HE 12-Core
40 GB RAM
HP Smart Array P410 RAID control
Hardware – What do you think the minimum developer-level PC?
Processor speed, memory, disk space, screen size. Which corners can be cut, and which corners should not be cut?
To be more specific-In my case, I am considering using eclipse as an IDE to de
How to solve the damage of the hard disk firmware area? Just learn these steps
[Fault category]
(1) Fault type: the hard disk firmware area is damaged
(2) Typical characteristics:
1. The hard disk seeks normally but cannot identify itself correctly Model or capacity
2. The
Restore highly degraded RAID arrays
I have a Linux RAID6 array (mdadm) consisting of 8 disks.
2 disks failed. I replaced them and now I have 2 new empty disks.
I want to rebuild raid
But
when I started raid reconstruction
RAID – DL160 GEN9 P440 SAS cable
We recently purchased a new HP Smart Array P440 RAID controller from the local HP reseller store of the HP DL160 gen9 server. (P/N: 783361-425) We hope to be on the server Running ESXi with three v