Illustration:
1.IP planning settings
2. Modify network card configuration and iptables configuration
??? strong>??? ????< /strong>??? strong>??? ????? strong>??????< strong>???? s
Illustration:
1.IP planning settings
2. Modify network card configuration and iptables configuration
??? strong>??? ????< /strong>??? strong>??? ????? strong>??????< strong>???? s
1, create a bond0 file
# vi /etc/sysconfig/network-scripts/ifcfg-bond0
DEVICE=bond0
NM_CONTROLLED=no #Whether your network card is managed by networkmanager, details later Speakin
Description: The server has two network cards: eth0 and eth1, eth0 is configured with internal IP: 192.168.1.1/24, eth1 is configured with external IP: 10.1.1.1/24; 192.168.0.0/16 is required The s
# How to configure a specific IP to take a router under multiple network cards (applicable to the situation where the external network is not connected, but the Dingding server is connected)
## How
You can set the priority of the network card as follows, set the No. 1 network card connected to the A network to 1, and the No. 2 network card of the B network to 2. The interface is as follows:
My motherboard has only one x16 PCIe slot and no x8 slot. I am buying a NIC with a very specific configuration, but it only works with x8 slots. I can plug in x16 Is an x8 card inserted in the slot