I have a DL360 G5 running WinSrvr2003, and a 3-drive (72GB) SAS Raid 5 array on the P400i controller. A single array has two partitions. (Operating system and data storage ) Drive 2 has failed and
Author: Simo
What RAID configuration I do actually?
Recently I have been playing with the (second-hand server) I recently purchased (HP ProLiant ML330 G6), and I am a bit confused about its current RAID configuration. I use the HP System Management
Partition aligned on Megaraid RAID 1, with 4K sector (advanced format) drive
I want to set up RAID 1 (mirroring) on an LSI MegaRAID SAS 8708EM2 (1078 chipset) with a 4k sector (advanced format) drive. As far as I know, the controller does not 4k sector drives are official
Server RAID is dead. How will you recover data from its drive?
We currently have 9 machines. One of them has an electrical fault and blows up the circuit board, but the drive seems to be okay. I’m not entirely sure that I will even try to recover data from it.
How to configure the specified IP under multi-network card to take a router (for external networks, but staple server communication)
# How to configure a specific IP to take a router under multiple network cards (applicable to the situation where the external network is not connected, but the Dingding server is connected)
## How
Hard Drive – How to measure disk speed and fast speed? How long does it take for a copy of 1500 GB?
How to measure disk speed? Does it read Mbit or Mbyte per second? What is today’s average, what is fast, and what is fast industry?
Let us say that some people say that it takes a long time t
Is the hard drive – whether the SSD driver benefits from non-default allocation unit size?
The recommended default allocation unit size when formatting the drive in the current settings is 4096 bytes. I understand the basics of the advantages and disadvantages of larger and smaller sizes
Hardware starts. Net compact framework development
I am interested in using the .NET compact framework to start some development.
Which hardware devices would you recommend for all tests?
I want to get two devices, one has many function
Partition downgrade in the RAID5 system
I have a server running Debian Squeeze and a 3x 500 GB drive RAID5 system. I have not set it up myself. At startup, the state of a partition in the RAID array seems to be very bad. < p>
md: b
RAID – Can you use the server RAM to make NAS cache?
I have a 4 CPU 16GB RAM system, with Areca 1230 RAID card and 6 HD, using RAID 0 1 configuration, with 1 hot backup. The system has 2 onboard 1Gpbs nics
I want to turn the system into a NAS.