I have two HP disks in RAID 1 (300 Gb), and want to have 2 additional disks in RAID 10, with a total of 600 Gb on C:. < p>
I want to know if it is possible to use the array configuration util
Hardware development generally refers to the hardware development of electronic products. The research and development of a kind of visible electronic products, such as mobile phones, mice, keyboards, and stereos are all hardware. Hardware development is a series of researches carried out in these areas. Hardware development is generally divided into: schematic design, circuit diagram design, PCB board design, test board production, functional testing, stability testing, single-chip design, small batch production, formal market or formal use and other steps.
I have two HP disks in RAID 1 (300 Gb), and want to have 2 additional disks in RAID 10, with a total of 600 Gb on C:. < p>
I want to know if it is possible to use the array configuration util
Today, I roughly measured the benefits of enabling write-back on the RAID controller on the server at work. It does not have a RAID battery backup unit (BBU), so write caching is currently disabled
I am learning Meteor 0.8.3 and trying to use iron-router to set up some basic routing
My smart.json contains:
{
packages: {
iron-router: {
git: https://github.com/EventedMind/iron-ro
Suddenly, I saw some verilog testbench code that uses $readmemh and $writememh. I understand it basically reads into memory and writes to memory. If you can point it out with these routines Some re
I have some Dell PowerEdge 2950s, which contain 4x 15k, 150GB Cheetah SAS drives. They will be VM hosts, CentOS running ESXi and Windows Server 2k8 clients. Some guests will host IIS servers , And
I have a HP ProLiant DL380 G5, I have two logical drives configured with RAID. I have a logical drive RAID 10 and two 72 gb 10k sas 1 ports spare 376597- 001.
I have a hard drive that has fai
I am running a BackupPC server with hardware RAID 5, which is used as the primary storage for backups. Since the machine was created under a small budget, the controller is used for the PCI port 3W
I am using the Angular UI router. Whenever I click on the ui-sref link, the address bar of the ios mobile browser will be displayed. For example, when I scroll down, The address bar will be hidden.
surfaceView can redraw the screen in a new separate thread, and the View must update the screen in the main thread of the UI. Then updating the screen in the main thread of the UI may cause problem
In the process of understanding the advantages of RAIDZ, I came across the concept of write vulnerabilities.
As explained on this page, write vulnerabilities are Refers to the inconsistency b