This article is a brief translation of http://www.grahamwideman.com/gw/brain/fs/surfacefileformats.htm, because I am not translating word by word, but Translate some sentences that I think are more
Month: September 2021
RAID – How to migrate the disk from one DELL PE 2850 to another?
I have a Dell PE 2850 bare chip, and I need to move its SCSI disks to another PE 2850. These disks are in RAID1. I tried to move them over, just hope PERC does it right Things, but it didn’t instal
HP P410 RAID Samsung 830 SSD Debian 6.0 – What performance is expected?
I am renting two dedicated servers from a hosting company. Here are the specifications:
server1:
HP ProLiant DL165 G7
2x AMD Opteron 6164 HE 12-Core
40 GB RAM
HP Smart Array P410 RAID control
Hardware – What do you think the minimum developer-level PC?
Processor speed, memory, disk space, screen size. Which corners can be cut, and which corners should not be cut?
To be more specific-In my case, I am considering using eclipse as an IDE to de
How to solve the damage of the hard disk firmware area? Just learn these steps
[Fault category]
(1) Fault type: the hard disk firmware area is damaged
(2) Typical characteristics:
1. The hard disk seeks normally but cannot identify itself correctly Model or capacity
2. The
Restore highly degraded RAID arrays
I have a Linux RAID6 array (mdadm) consisting of 8 disks.
2 disks failed. I replaced them and now I have 2 new empty disks.
I want to rebuild raid
But
when I started raid reconstruction
RAID – DL160 GEN9 P440 SAS cable
We recently purchased a new HP Smart Array P440 RAID controller from the local HP reseller store of the HP DL160 gen9 server. (P/N: 783361-425) We hope to be on the server Running ESXi with three v
HP-ProLiant – ProLiant DL360 RAID5 Hot Slug Driver
I have a DL360 G5 running WinSrvr2003, and a 3-drive (72GB) SAS Raid 5 array on the P400i controller. A single array has two partitions. (Operating system and data storage ) Drive 2 has failed and
What RAID configuration I do actually?
Recently I have been playing with the (second-hand server) I recently purchased (HP ProLiant ML330 G6), and I am a bit confused about its current RAID configuration. I use the HP System Management
Partition aligned on Megaraid RAID 1, with 4K sector (advanced format) drive
I want to set up RAID 1 (mirroring) on an LSI MegaRAID SAS 8708EM2 (1078 chipset) with a 4k sector (advanced format) drive. As far as I know, the controller does not 4k sector drives are official