I am familiar with the program supported by Dell, but HP Proliant is not. Does anyone have a link to this instruction?
This can be very hot while the system is running.
The description of the HP Smart Array RAID controller technology is available here.
I have a DL360 G5 running WinSrvr2003, and a 3-drive (72GB) SAS Raid 5 array on the P400i controller. A single array has two partitions. (Operation System and data storage) Drive 2 fails and goes offline (amber and internal beep) I have replaced the drive but cannot find step-by-step instructions in hot swap and drive rebuild. When the system is online and running, do I only Need to pull the drive and insert a new drive?
I am familiar with the program supported by Dell, but HP Proliant is not. Does anyone have a link to this instruction?
Yes, in this case, you will pull the broken drive and insert a new drive. The HP Smart Array controller will automatically start the rebuild process.
This can be very hot while the system is running.
The description of the HP Smart Array RAID controller technology is available here.
< /p>