Virtualization – use SLC exchange on the VM host as RAM replacement is wise?

I have some old servers running virtual machines, but they are limited to 16GB RAM, which limits the number of VMs I can run and the options for RDS.

< p>I added two Intel 311s RAID1 arrays: 20GB SLC SSDs and configured them as swaps on the host. I hope that I can now over-allocate the available memory to VMs more confidently.

to So far, it has done a good job in testing, but before I research further, I would like to ask, have I missed any major reasons why this would be a bad idea?

I might have mentioned that several virtual machines are used very intermittently, but I cannot reduce the memory when they are active, which is needed.

No, it is not a good substitute for real RAM. SSD drives are an order of magnitude slower than RAM…but you know :).

Under limited memory conditions, the drive’s write endurance also has problems.

If the solution seems to work well in the test, then try to use it… but know that it is correct The method is to equip the system with the necessary amount of RAM. If your system cannot accommodate this much RAM, then it is time to upgrade to modern hardware.

I have some running virtual The old servers of the computer, but they are limited to 16GB RAM, which limits the number of VMs I can run and the options of RDS.

I added two Intel 311s RAID1 arrays: 20GB SLC SSD , And configure them as swaps on the host, I hope I can now more confidently over-allocate the available memory to the VM.

So far, I have done a good job in testing, but in my further research Before, I would like to ask, have I missed any major reasons why this would be a bad idea?

I might have mentioned that several virtual machines are used very intermittently, but I cannot reduce the memory when they are active, which is needed.

No, it is not a good substitute for real RAM. SSD drives are an order of magnitude slower than RAM…but you know:).

Under limited memory conditions The drive’s write endurance is also problematic.

If the solution seems to work well in the test, then try to use it…but know that the correct way is to equip the system with the necessary amount of RAM. If Your system can’t hold so much RAM, so it’s time to upgrade to modern hardware.

WordPress database error: [Table 'yf99682.wp_s6mz6tyggq_comments' doesn't exist]
SELECT SQL_CALC_FOUND_ROWS wp_s6mz6tyggq_comments.comment_ID FROM wp_s6mz6tyggq_comments WHERE ( comment_approved = '1' ) AND comment_post_ID = 1470 ORDER BY wp_s6mz6tyggq_comments.comment_date_gmt ASC, wp_s6mz6tyggq_comments.comment_ID ASC

Leave a Comment

Your email address will not be published.