All,
I have a DL380 G4 server with the following drives:
> 2x 36.4GB – 15K
> 2x 36.4GB – 10K
> 2x 300GB – 10K
I am trying to figure out how to best configure these drives. This is
Tag: How
How does RAID – PROMISE FASTTRAK 133 interleaves striped arrays?
My colleague configured two drives on the main board with a strip of Promise FastTrak 133 onboard. The main board failed and we could not find any other onboard Promise control that can recognize t
RAID – How to migrate the disk from one DELL PE 2850 to another?
I have a Dell PE 2850 bare chip, and I need to move its SCSI disks to another PE 2850. These disks are in RAID1. I tried to move them over, just hope PERC does it right Things, but it didn’t instal
Hard Drive – How to measure disk speed and fast speed? How long does it take for a copy of 1500 GB?
How to measure disk speed? Does it read Mbit or Mbyte per second? What is today’s average, what is fast, and what is fast industry?
Let us say that some people say that it takes a long time t
How to choose the best RAID settings on the PE2950
I have some Dell PowerEdge 2950s, which contain 4x 15k, 150GB Cheetah SAS drives. They will be VM hosts, CentOS running ESXi and Windows Server 2k8 clients. Some guests will host IIS servers , And
SATA – RAID card with 1x Mini-SAS connector: How to physically connect 16 disks?
I am looking for a MegaRAID SAS 9240-4i Sgl card with a single X4 Mini-SAS SFF8087 connector. As far as I know, such a connector can be expanded to 4 SATA disks. So , I know how to connect 4 SATA d
RAID – How to place high capacity storage
I’m building high-capacity storage for video. It’s currently at the 20TB mark and is growing. Currently, I have a 12-bay chassis with 2TB hard drives and configured as RAID-6 .I am considering purc
Algorithm – How does the router organizes the routing table?
How does a router organize its routing table to quickly serve crashed packets? This is more like a programming problem, I’m looking for:
>Algorithms and data structures to store routing table
BIOS – How to disable VGA on a new server … reversible?
The strange problem is here. I have a server with 1GB RAM, but it shows 768MB at startup. I found the reason for it-that is, it has a shared memory with the main RAM Onboard graphics card. Running
What happens to the Node ID in the CAN bus?
In principle, two nodes are not allowed to have the same ID segment in a CAN-bus network, but what if the two nodes have the same ID segment?
Before the experiment, we must first have a clear un