I have a HP ProLiant DL380 G5, I have two logical drives configured with RAID. I have a logical drive RAID 10 and two 72 gb 10k sas 1 ports spare 376597- 001.
I have a hard drive that has fai
Tag: RAID
Optimized RAID 5 (small random read) for Backuppc
I am running a BackupPC server with hardware RAID 5, which is used as the primary storage for backups. Since the machine was created under a small budget, the controller is used for the PCI port 3W
Supermicro MBD-X7Sbe asterisk uses a large number of onboard RAID-1 or software RAID?
I am using the onboard RAID controller of my SUPERMICRO MBD-X7SBE to set up a RAID-1 array with two Seagate ES2 hard drives. About 8 in our production I will use this for repeated Asterisk usage to
Capacity and fault tolerance with MD RAID10 with N2 F2 layout
The following is starting from Intro to Nested Raid
Linux md allows you to combine “near” and “Far” RAID configurations. For example, in am=2 and f=2 configuration with four drives (the minim
Install Debian on the software RAID (Lilo.conf configuration)
The Debian installer created lilo.conf:
boot=/dev/md1
root=/ dev/md1
raid-extra-boot=mbr-only However, when I configure lilo I usually put these lines
disk= /dev/md1
sectors=63
heads=25
RAID – Exchange the entire disk between Dell PowerEdge servers
I have a dell poweredge R610, which has 2 x 140 GB hard disk mirroring (hardware), and runs high CPU-intensive applications in Windows 2008 R2. We recently purchased a new Dell PowerEdge R610, whic
RAID – Array on the server, receives hundreds of GB of data daily
Hope this is a simple question. Now we are deploying a server that will be used as a data warehouse. I know the best practice for RAID 5 is to have 6 disks per RAID 5. But , Our plan is to use RAID
RAID reconstruction period file system performance drops
Such a quick problem-our RAID6 array is currently being rebuilt, and there is a very obvious loss of file system performance (the home directory is NFS installed on the array). I’m a bit look
Virtualization – ESXi 4.1 is located on a separate RAID 10 logical drive or RAID 10 single logical drive
When dealing with ESXi, a lot of answers have been viewed around different RAID configurations and best methods. However, I still have some unanswered questions.
There are 8x 300GB 10K SAS dr
MDADM RAID5 size
I currently have 9x1TB disks in RAID5, which for me is 8TB of storage space. However, I did not do this at all. This is necessary for migrating from RAID6 to RAID5 and performing After the command