In fact, in the early hard disk partitions, there is no concept of primary partition, extended partition and logical partition. The type of each partition is now called the primary partition. Since
Tag: system
Partition downgrade in the RAID5 system
I have a server running Debian Squeeze and a 3x 500 GB drive RAID5 system. I have not set it up myself. At startup, the state of a partition in the RAID array seems to be very bad. < p>
md: b
In addition to the dual UPS PS system, the advantage of RAID BBU
Today, I roughly measured the benefits of enabling write-back on the RAID controller on the server at work. It does not have a RAID battery backup unit (BBU), so write caching is currently disabled
Building a local YUM warehouse via mount system U disk
First, open hbza (CentOS) and yum, the two must be connected
th1Step: athbza Create a directory and enter mkdir /lxk, start with any name. Entermount /dev/cdrom /lxk
< /p>
第2Step
RAID reconstruction period file system performance drops
Such a quick problem-our RAID6 array is currently being rebuilt, and there is a very obvious loss of file system performance (the home directory is NFS installed on the array). I’m a bit look
Disk storage and file system
Partition Two partition formats: MBR, GPT
The partition table information of MBR partition disk is stored in A total of 512 bytes in the 0th sector of the hard disk track 0
The first 446 byt
RAID – PROLIANT ML350 G3 System Board Fault
The system board of my ProLiant ML350 G3 tower server broke after an inch of the lower edge in the rain. I have a SCSI controller Smart Array 532 with a RAID5 drive installed, There are six (36GBx3
Mac system installation JDK, Tomcat, MySQL, Maven
MAC install JDK: This article is mainly for Install JDK1.8 and configure system environment variables under MAC Apple system. It is mainly divided into the following steps:
Download from jdk
Change the BIOS settings on the SuperMicro system via script
I see that Dell & HP have a program that can change the B IOS settings remotely or through scripts/files.
Does anyone know how to do it on the Supermicro system? To do this, or is there a sys
In the multi-GPU system, how to match the PCI supplier, device and bus ID using a specific GPU?
I want to be able to match the OpenCL device with the GPU in the system on the multi-GPU system recognized on the GPU.
For example, if I have a For systems with multiple GPUs, which may come