We are working on a large-scale server deployment (DL160SE G6) and I need to find a way to configure their B IOS settings without going through the RBSU of each server-it will cost Too long.
Month: September 2021
STM32 single-chip serial port one-click download circuit and operation method detailed
The storage media corresponding to the three boot modes of STM32 are all built-in chips. They are:
1) User flash memory = Flash built into the chip.
2) SRAM = The RAM area built into the chip is
MacOS – IOS file system accessing Mac
I am trying to use the mac app DiskAid and found that it can do everything I need in the application I am writing. DiskAid seems to have full access to the file system on the iPad. This is not limi
MAVEN environment installed in Mac
—Restore content begins—
1, maven download
Download link: https://archive.apache.org/dist/maven/maven-3/3.3.9/binaries/apache-maven-3.3.9-bin. tar.gz
2. Decompress and configu
Reset factory default settings – HP ProLiant DL360 Gen8
I have an HP Proliant DL360 gen8 server that seems to have the USB turned off in the B IOS. I want to enable it again.
After turning off the USB, I can’t Intervention during POST-the USB keyb
“Internet of Things Framework Serversuperio Tutorial” -4. As developed a set of equipment drivers while support serial port and network communication. Attachment: Wanted Windows 10 IOT
1.C# Cross-platform Internet of Things Communication Framework ServerSuperIO (SSIO) Introduction
“Serial | Internet of Things Framework ServerSuperIO Tutorial” 1.4 communication mode mechanis
MacOS – How to stop and start Jenkins on the Mac
See the answer in English> How to stop Jenkins installed on Mac Snow Leopard? 7 of them
I installed Jenkins on my local machine. It runs fine and works normally. Stop and What is the correct way to
On the Path Problem under the STS of Mac and Windows
under mac
targetProject=”../atcrowdfunding-manager-impl/s
Tornado uses WebSockets on Raspberry Pi and monitors serial Arduino communication
Basically, what I want to achieve is a canvas-based web interface to control an Arduino through Raspberry Pi. The use case is that a user navigates to raspberrypi:8080 to display a canvas. Then aft
Serial port – Windows UWP Windows.devices.serialCommunication.SerialDevice does not work
Is it just me, or is it a bug?
serialPort = await SerialDevice.FromIdAsync(Id); serialPort is always null, even if Id is not.
I need this to work. Now I just write very “fast and dirty”