I am upgrading my Ionic 3 project to the latest Ionic 4, and I have some trouble with routing. In Ionic 3 I use setRoot like this: < /p>
handler: () => navCtrl.parent.parent.setRoot(HomePage,
Month: September 2021
Storage – DL380 G4 – How to properly configure RAID array
All,
I have a DL380 G4 server with the following drives:
> 2x 36.4GB – 15K
> 2x 36.4GB – 10K
> 2x 300GB – 10K
I am trying to figure out how to best configure these drives. This is
The relationship between SurfaceView and Surfaceholder
1. SurfaceView is an inherited class of View, and a Surface dedicated to drawing is embedded in this view. You can control the format and size of this Surface. Surfaceview controls the drawing posi
ZRAID1 pool size beyond expected
I have 3x 4TB drives for ZRAID1 configuration (single parity drive)
After running
zpool create data zraid1 sdb sdc sdd My volume size is 10.9T, which is my expected stripe configuration
U disk installed H3C-KYLIN server process
0.Using UltraISO to burn kylin3.3 system to U disk 1.ESC or DEL to enter the setup, click Boot, and the BootMode “UEFI” is changed to “Legacy”; 2.CTRL+A enter RAID setting First click the initial
Hard Disk – What is this hardware term?
This is a stupid question, but what is the “official” term for carrying this hard drive?
I need to know if I can purchase separately from the hard drive.
Yes, they can be removed from t
RAID controller problem: NVDIMM or not?
I’m in the new RAID controller market for Dell servers, I can choose between “PERC H700 512mb Cache” and “PERC H700 512mb NVDIMM Cache”. There is a $200 difference between the two cards , Can anyon
Server two hard drives are enabled to enhance the online recovery
Off-line data recovery case of two hard drives in the disk array: One of the customer’s servers caused a red light on a hard drive for unknown reasons, but the server is still operating normally an
HP drive array “Preparation Reconstruction” (RAID5)
We have a ProLiant server with a Smart Array P440ar controller.
Due to about three weeks, the “do not remove” instructions on some SAS drives The light is on. Maybe after a power failure.
RAID1: A RAID or partition on each partition on RAID device?
What is more suitable for ordinary servers:
>Multiple partitions, which are bundled into multiple RAID1 devices (/dev/md0,/dev/md1, …), there is no unmirrored partition.
>A big /dev/md0, and