All,
I have a DL380 G4 server with the following drives:
> 2x 36.4GB – 15K
> 2x 36.4GB – 10K
> 2x 300GB – 10K
I am trying to figure out how to best configure these drives. This is
Tag: DL
RAID – DL160 GEN9 P440 SAS cable
We recently purchased a new HP Smart Array P440 RAID controller from the local HP reseller store of the HP DL160 gen9 server. (P/N: 783361-425) We hope to be on the server Running ESXi with three v
HP-ProLiant – ProLiant DL360 RAID5 Hot Slug Driver
I have a DL360 G5 running WinSrvr2003, and a 3-drive (72GB) SAS Raid 5 array on the P400i controller. A single array has two partitions. (Operating system and data storage ) Drive 2 has failed and
RAID – How to combine 2 controllers in HP DL370 G6 (6 brackets)
I have a server DL370 G6, as shown below, I want to install Windows Server 2008 E. We are using it for camera recording. Each slot has 6 2 TB hard drives.
I want to merge them into Raid 1 for
Unattended BIOS configuration (DL160SE G6)
We are working on a large-scale server deployment (DL160SE G6) and I need to find a way to configure their B IOS settings without going through the RBSU of each server-it will cost Too long.
Reset factory default settings – HP ProLiant DL360 Gen8
I have an HP Proliant DL360 gen8 server that seems to have the USB turned off in the B IOS. I want to enable it again.
After turning off the USB, I can’t Intervention during POST-the USB keyb